Hard Pipe with Single Valve and Kit for BMW 335

£439.01


Code: FMBM335DV1


We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Suitable for the BMW 335 fitted with the N54 Twin Turbo engine. This alloy hard pipe fits to the throttle body and incorporates our high flow blow off valve. This valve, fresh from our R&D department, is the largest displacement valve that Forge have ever made! Featuring a 50mm (2”) aluminium piston so that there are no issues with split diaphragms, we have not found the power handling limits of this valve yet!

The piston uses heat stabilised viton o-rings and high temperature grease to ensure a long life with minimal wear and very long service intervals.

In The Box:
1 x FMBM335DV1 Valve
1 x Alloy Throttle Body Hard Pipe 
1 x Silicone Reducer
2 x Silicone Straight Blanks Hoses (25mm)
2 x 30mm Hose Clamps
1 x 80mm Hose Clamp
1 x 90mm Hose Clamp
2x M6 x 12 Socket Cap Bolts
1 x M6 x 16 Socket Cap Bolts
1 x M6 Penny Washer
2 x M6 Plain Washer
1 x USB Instructions
1 x Forge Keyring, Bottle Opener and Sticker

Note: that due to the high flow and low restriction offered by the 50mm valve, they are very quiet in operation.

If you require a different spring setup, please see here

Downloads:

Tags

  • BMW
    • 1 Series > E82 2Dr Coupe 2007-2013 > 135i 2007-2010 (N54)
    • 1 Series > E82 2Dr Coupe 2007-2013 > 135i 2010-2013 (N55)
    • 1 Series > E82 2Dr Coupe 2007-2013 > 1M 2011-2012 (N54)
    • 1 Series > E88 2Dr Convertible 2007-2013 > 135i 2007-2010 (N54)
    • 1 Series > E88 2Dr Convertible 2007-2013 > 135i 2010-2013 (N55)
    • 1M > 1M > E82 2dr Coupe 2011-2012 (N54)
    • 3 Series > E90/E91/E92/E93 Coupe/Convertible/Saloon/Estate 2004-2013 > 335i 2006-2009 (N54)